Acc-Red 6 in Threshold Wheelchair Ramp, Aluminium and MS, 18 x 30 in, 300 kg Capacity, Anti-Slip Surface

Designed for an exact 6-inch rise. The Acc-Red 6 in Threshold Wheelchair Ramp provides a portable transition across a raised doorway threshold or single step. It measures 18 inches long and 30 inches wide, weighs 7.2 kg and has a rated capacity of 300 kg.

The ramp uses aluminium and MS construction with an anti-slip chequered surface and 4.5 cm side edge guards. It is suitable for manual wheelchairs, electric wheelchairs and mobility scooters where the doorway has a minimum clear width of 33 inches.

Check whether this ramp fits your location

1. Measure the rise: Measure vertically from the lower floor to the top landing. This model is intended for an exact 6-inch rise.
2. Measure the doorway: A minimum clear doorway width of 33 inches is required. The ramp surface is 30 inches wide.
3. Check the mobility device: Confirm the overall width, wheelbase and ability of the wheelchair or scooter to negotiate a short incline.

Important: This is a compact threshold transition, not a permanent access ramp. Suitability depends on the location, user and mobility device. Contact Acc-Red before ordering if you are unsure.

Technical specifications

Frequently asked questions

Can this ramp be used for a rise other than 6 inches?

No. This model should be selected only for an exact 6-inch vertical rise.

Does the ramp require installation?

No fixed installation, drilling or locking is required. Confirm stable placement and correct site fit before use.

Will it fit my doorway?

The ramp is 30 inches wide and requires a minimum clear doorway width of 33 inches. Always measure the available opening before ordering.

Does the ramp fold?

No. This threshold ramp does not have a folding mechanism.

Need help confirming the correct ramp? WhatsApp your step height, doorway width and a clear photograph to +91 95947 41515.