Acc-Red 6 ft Telescopic Wheelchair Ramp Pair, Aluminium, 300 kg Capacity, 6.5 in Tracks

A two-track telescopic wheelchair ramp for temporary access. The Acc-Red 6 ft Telescopic Wheelchair Ramp is supplied as a pair of aluminium tracks. Each track extends to a nominal length of 6 feet, with a listed overall open length of 193 cm, and retracts to 48 inches for transport and storage.

Each track provides a 6.5-inch running surface. The complete ramp pair weighs 16.5 kg and has a rated capacity of 300 kg. It is suitable for select manual and electric wheelchairs after confirming wheel width, wheel alignment and site conditions.

Check whether this ramp fits your wheelchair and location

1. Measure the vertical rise: The technical recommendation is a maximum rise of 18 inches using a 1:4 gradient.
2. Check the available space: Confirm sufficient clear space for the tracks to extend and rest securely at both ends.
3. Measure the wheelchair: Confirm that the front and rear wheels can remain aligned within the 6.5-inch-wide tracks.
4. Check the top landing: The 4-inch transition flaps must have complete, stable support at the upper landing.

Important: A 1:4 gradient is a steep temporary-use configuration, not a universal safety or accessibility-compliance rule. Suitability depends on the user, wheelchair, attendant and site. Contact Acc-Red for a fit check before ordering.

Technical specifications

Product configuration	Pair of two telescopic wheelchair ramp tracks
Nominal extended length	6 feet
Listed overall open length	193 cm
Retracted length	48 inches
Track width	6.5 inches per track
Material	Aluminium
Rated capacity	300 kg for the complete pair
Load testing	In-house load tested up to 300 kg
Product weight	16.5 kg for the complete pair
Packed dimensions	120 x 30 x 13 cm
Shipping weight	17.1 kg
Surface	Textured anti-skid and water-resistant surface
Top transition flap	4 inches with an anti-skid surface
Side edge guards	4.5 cm
Locking mechanism	Lock provided to prevent unintended opening
Recommended rise	Up to 18 inches at the recommended 1:4 gradient
Compatible devices	Select manual and electric wheelchairs
Setup	No fixed installation or anchoring required
Handling	The ramp pair can be positioned by one operator
Included	One 6 ft telescopic ramp set containing two tracks
Country of origin	India
Manufacturer	Accessibility Redefined Private Limited
Warranty	1 year against manufacturing defects

Frequently asked questions

Is this one wide ramp or two separate tracks?

It is supplied as a pair of two telescopic tracks. Each track is 6.5 inches wide and must be aligned with the wheelchair wheels.

Will it fit every wheelchair?

No. It is suitable for select manual and electric wheelchairs. Wheel width, tyre width, caster alignment and wheelbase must be checked before use.

What step height can it be used for?

The technical recommendation is up to 18 inches at a 1:4 gradient. User, wheelchair and site suitability must still be assessed.

Does the ramp fold?

No. The two tracks telescope and retract to 48 inches for storage and transport.

Can one person set it up?

The ramp pair can be positioned by one operator. Wheelchair movement may still require an attendant depending on the user, wheelchair and incline.

Need help checking compatibility? WhatsApp the step height, landing depth, wheelchair measurements and photographs to +91 95947 41515.